Accessory / Maintenance

Boat cover accessories and maintenance

There are 7 products.

Sort by:

Showing 1-7 of 7 item(s)

Marine crystal sale

€42.00

Replacement of rear closure crystal

From

€234.84

Convertible top window replacement

From

€140.90

Waterproofing for boat fabric TEX'AKTIV GUARD

€47.31

Boat Fabric Cleaner/Stain Remover TEX'AKTIV CLEAN

€24.49

9 mm zipper

From

€7.08

Dry lubricant spray with PTFE

€56.62

OUR SELECTION FOR YOU

Here you will find a selection of our bestsellers, revealing the most popular nautical products of the moment.

Custom-made lazy bag

From

€439.42

Custom-made Essential Genoa Sail Cover

From

€471.29

Stainless Steel Bolster Support Cushion Zodiac and Bombard

From

€264.16

Winter cover for Bombard Explorer 530 SB

From

€946.80

Optima Zodiac and Bombard Bolster Cushion

From

€243.24

Eco-friendly cabin carry-on backpack

From

€155.95

3/4 Rear Cover Zodiac Medline 7.5

From

€1,164.25

Flat cover for Jeanneau Cap Camarat 7.5 WA S2 deck

From

€1,415.22

Sun lounger cushion Jeanneau Cap Camarat 7.5 WA S2

From

€1,431.15

Semi-rigid sun awning

From

€578.58

Jeanneau Pilot Seat Cover New Model

From

€140.28

Custom-made mainsail cover

From

€301.88

9 mm zipper

From

€7.08

Winter shelter Latitude 46 Tofinou 7

€1,941.80

Custom-made bar cover

From

€279.30

Zodiac Medline 6.8 Console Cover

From

€527.06

Triple Pogo 3 Hatches - Pair

€218.36

Bimini Bombard Explorer 690

€2,273.00

HAVEN'T FOUND WHAT YOU'RE LOOKING FOR?

Enter your boat model below or Contact us

Usage precautions and maintenance:

Boats are an exciting way to spend time at sea, whether for fishing, wakeboarding, or cruising. However, to maintain their optimal condition and extend their durability, it is important to take care of their fabrics, such as covers, canopies, camping tarps, or biminis. These products are made from the best materials and coatings to ensure exceptional quality.

To preserve the aesthetic appearance and integrity of your boat canvases, here are some suggestions for their maintenance and cleaning:

Regularly clean the canvases to remove dust, dirt, and environmental residues.

For camping canopies, biminis, and covers, remove them when strong winds are expected to avoid injuries and damage to the boat.

During towing, also remove camper roofs, convertible tops, side curtains, and interior fabrics to avoid damage.

Use a suitable cleaning product and follow the usage instructions.

Do not wash in a machine or with hot water or a pressure washer, to avoid deformation and to prevent damaging the seams and the roof itself, which would alter its water-repellent properties.

Regarding rear closures, such as camping covers, biminis, and roof canopies:

Cleaning products:

Their maintenance is just as important to ensure safety and comfort during your outings at sea. Comfortable camping at sea is a pleasant way to get closer to nature and spend time with family or friends. These rear closures are often used for weekend getaways and allow for enjoyable moments at sea or in the harbor.

It is important to follow the usage and maintenance instructions to navigate safely and stay dry. It is recommended to never leave a camping cover unattended for long periods, to take care of your boat canvases to extend their lifespan, and to remove camping covers, biminis, and canopies when strong winds are expected. It is also important to remove camper tops, convertible tops, side curtains, and cockpit covers when towing the boat, and to fold and lay the bimini top flat to avoid damage.

Do not wash it in the machine, nor with a high-pressure cleaner or strong detergents. The maintenance of your boat must be carried out with respect for the environment around us.

It is important to choose the most environmentally friendly cleaning products possible that pose no risk to marine creatures such as fish and birds. It is also important not to discharge wastewater from cleaning into the sea. To preserve our environment, it is best to stay away from significant bodies of water when cleaning the sails or vinyl of your boat.

Mold tasks:

Molds can cause significant damage to boat canvases. The fabrics and vinyls used by SNA are designed to resist these issues; however, they alone cannot counteract the effects of dirt. The moisture in the air promotes the growth of mold on boat canvases.

Waterproofing, leak at the seams:

Water protection is a crucial element to ensure the longevity of your boat. Although our covers are made from the best waterproof materials, leaks may occur due to extreme weather conditions or condensation. Seams and zippers can also be weak points for water infiltration.

To minimize this risk, we use marine-grade sewing threads that are UV-resistant to assemble our products. These double stitches are strong and durable, thereby reducing the risk of water infiltration. It is also recommended to spray a waterproofing product on boat covers after a few years of use and/or after several cleanings to enhance water protection. It is important to use only products recommended by the fabric manufacturer to avoid compromising their performance; you will find them To buy here.

Handling transparent vinyl and storage:

Handle the soft crystal with care. It is soft, it relaxes in the sun, it scratches easily, and if a crease is pressed, the crystal will not return to its original shape; the vinyl will be permanently marked.

You should never fold your canvas at the level of a transparent window; you should try to make the smallest possible shape by folding the canvas onto itself and choosing a fabric area as the folding point. Then, you roll the resulting shape. This allows you to store your cover without taking up space. Very important, you must absolutely not place anything on top of it. Doing so would cause creases to form. This recommendation is especially important for pieces with clear vinyl.

It is crucial to ensure that all equipment is completely dry before storing it, as any material that remains damp is vulnerable to mold growth. When storing your cover, make sure it is clean and dry, and always store it in a cool, dry, and well-ventilated place. Dust and moisture can promote the growth of mold, which can irreparably damage your cover. It is important to pay attention to seams and edges, which take longer to dry. If you notice a musty smell or black spots, this may be a sign of mold presence. In this case, it is important to act quickly by airing out the cover and cleaning it.

Maintaining the stainless steel framework:

It should be noted that even though stainless steel is said to be stainless and its quality is marine-grade 316L stainless steel, it still needs to be maintained to prevent corrosion, which will inevitably occur over time.

If you regularly rinse your structure with fresh water, scrubbing with a brush and soapy water as soon as it gets dirty, you will avoid having to use specific products that you can find at marine equipment suppliers.
Never scrub with abrasive sponges such as Scotch-Brite, as this would create microcracks where dirt can settle, leading to rust and unsightly streaks in the short term.

Your online store for on-board protection and comfort

Made in France, eco-responsible manufacturing, we answer the phone, great customer satisfaction, best price guaranteed and best manufacturer in France.

Shipped within 3 days

custom-made sail covers

Advice and Support

8 AM to 8 PM, 7/7 - phone and WhatsApp

Made in France

Delivered to Europe, North America,
and Overseas France

Custom-made products

According to measurement sheet or photos

Our reputation is built on the professional quality of our products and the importance we place on customer satisfaction.

SNA
18 rue de Govéan
ZA Kerollaire Nord
56370 Sarzeau
France

Contact us

Products

Order

GUARDTEX

Informations

Functional cookies

Yes

Description and cookies

Functional cookies are strictly necessary to provide the store's services and ensure its proper functioning; therefore, it is not possible to refuse their use. They allow the user to navigate our website and use the various options or services offered.


PHP_SESSID	www.sellerie-nautique.com	The PHPSESSID cookie is native to PHP and allows websites to store serialized state data. On the website, it is used to establish a user session and to transmit state data through a temporary cookie, commonly called a session cookie. These cookies will remain on your computer only until you close your browser.	Session
PrestaShop-#	www.sellerie-nautique.com	This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as the currency, language, customer ID, among other data necessary for the proper functioning of the store.	480 hours

Analytics cookies

Yes

Description

Collect information about the user's browsing in the store, generally anonymously, although sometimes it also allows uniquely and unequivocally identifying the user in order to obtain reports on the user's interests in the products or services offered by the store.