Quicksilver Activ 755 Sundeck flat deck cover

A mooring cover is particularly useful for protecting the upholstery and the boat’s polyester hull. Upholstery, which includes cushions, seats and other fabric accessories, is especially vulnerable to the elements, which can cause it to fade and deteriorate quickly. A made-to-measure cover protects the upholstery from UV rays, rain, wind and other elements that can damage it.

When you invest in an Activ 755 Sundeck, it is essential to protect it from the elements.

This protective cover covers your boat from bow to stern, except for the guardrails. It is a perfect fit, a mark of quality craftsmanship that will protect your boat from bad weather and the sun for a long time.

Spend less time on maintenance and more time out on the water. Extend the life and preserve the value of your Quicksilver Activ 755 Sundeck.

Our boat cover is made to your preference in either:

• marine-grade polyester tarpaulin, coated on both sides and weighing 325 g/m².
• polyester fabric with a fabric-like appearance

To ensure a secure fit, all the boat’s existing attachment points are used to avoid drilling holes.

The marine fabric is secured at the cleats and the bases of the guardrails using either:
- Straps that loop around the stainless-steel guardrails and/or cleats, then pass through a ladder-lock buckle. Pull the straps tight to secure them. (A ladder-lock buckle is the flat type of buckle commonly found on backpacks, for example.)
- Shock cords that loop around the stainless-steel guardrails and/or cleats and pass through eyelets.

The outboard motor is not covered. Please see the motor covers we offer.

Each cover is made to measure, taking into account your boat’s equipment (photos required). This includes the bimini, frame, roll bar, towing pole, navigation light, antenna, etc. Please specify any special features when placing your order.

This protective cover is intended for use on land or at anchor. It should not be left on the boat during transport for two reasons: first, for safety, as the cover could come loose; and second, because friction caused by speed could damage the boat’s surface and lead to premature wear.

Please note that the cover is not designed to withstand strong winds, such as those during storms, cyclones or hurricanes. It must be removed before severe weather.

Strong winds have a greater impact when the boat is ashore on a cradle, that is, raised off the ground, and even more so if it is not facing into the prevailing wind.