Complete cover Huracan 6.0

Choosing a winter cover proves to be a strategic decision to preserve the appearance and equipment of your boat against external aggressions.
Using a mooring cover is one of the most effective ways to protect your boat from the sun's rays, rain, and other elements that can damage the hull and seats.

The sun's rays, rain, and harmful elements can leave unwanted marks on the hull and upholstery of your precious vessel.

Polyester, a material prized in boatbuilding for its durability against UV rays, will fade and crack if exposed to the elements for prolonged periods.

This is where the mooring cover comes into play. It acts as an impenetrable shield, preserving the polyester surface from the ravages of UV rays.

The cover extends from front to back without the engine, stopping at the base of the railings.
Strap loops are sewn and/or eyelets through which a bungee cord passes, which is tensioned like a stretcher around the bases to secure the cover.
No drilling is required since we use the natural attachments available on the boat.

A vent is sewn in to ensure ventilation since the fabric used is waterproof. This marine fabric is a polyester cloth coated with PVC on both sides, gray in color, weighing 325g/m².

This protective tarp is to be used on land or at mooring. It must not remain on the boat during transport, for two reasons: first, for safety reasons, the cover should not come loose, and second, the friction caused by speed could damage the boat's surface, wearing it prematurely.

It is important to note that the cover is not designed to withstand strong winds such as storms, cyclones, hurricanes. It must be removed before the arrival of these weather phenomena.

For this boat, we cover from the base of the windshield to the covered rear backrest.
The provided fastenings are installed at the bases of the stanchions and stainless steel parts, thus avoiding drilling the boat.