The winter cover for the rigid inflatable boat Pro 7 is an essential piece of equipment to protect your boat from bad weather, UV rays, and dirt during the winter months or when it is not used for an extended period.

Since it is easy to handle, you can also put it back on between launches during the season.

The boat cover made by SNA is made from a high-quality marine material, composed of polyester coated with PVC on both sides and lightweight, 325g/m², which is half the weight of a truck tarp. The color is gray.

The cover protects the entire boat, from the front (the bow roller, which remains accessible in 95% of our covers) to the transom, excluding the engine so it can be fully lifted. You will find covers for your outboard motor on our website.
The tarp is attached to the float's fender (also called anti-chafing strip, it absorbs shocks rather than the float being in direct contact) by hooks held together with a bungee cord. For balanced fastening, the bungee (thick elastic) passes through eyelets distributed around the tarp's perimeter. To prevent the stainless steel eyelets from contacting the float, we sew a PVC fabric flap underneath the eyelets. The plastic hooks attach to the gutter located under the fender. For all fastening details, please refer to our video installation tutorial.

You will notice that installing the boat cover requires no drilling.
We use all the natural attachment points on your inflatable boat.

Each boat is unique, and our tarps reflect that. Our commitment to customization means you will find the perfect size and shape for your vessel.

We check the console’s position when bolted, the presence of a bimini, roll-bar, railings...

For example, the console’s position when it is not molded must be confirmed with a measurement form that we send you after your order or that you can fill out immediately by downloading it.
Bimini and roll-bar options must be indicated by selecting the option when adding the product to your cart. There is also a measurement form to fill out so we can plan the necessary openings for the roll-bar legs.

We anticipate everything as much as possible so that you are fully satisfied with your purchase.

The boat cover is equipped with a vent to ensure ventilation under the cover.

All seams are sewn with UV-resistant sail thread, ensuring great durability for the covers.

The cover is delivered to you in a bag.

The boat cover will help you reduce maintenance and repair costs in the long run while allowing you to spend more time enjoying your leisure activities.

Please note that this full cover must be removed before driving on the road.

During the boating season, it is also useful to have console and seat covers that you put on each evening instead of using the mooring cover.

Finally, you can be reassured by the exceptional quality of our boat cover, also commonly called a mooring cover, even though it is more difficult to install when the boat is in the water. Made by our company SNA in Brittany, which is a trusted company with 13 years of experience dedicated to customer satisfaction.

You will be asked for measurements regarding the console’s position.
In the photos, you can see that the customer chose to position the flap above the engine.
This is not our recommendation because this flap is intended for when the backrest is very close to the engine. This flap is designed to protect the rear of the boat from wind, water, and dust ingress.