Salpa Soleil 20 Console Cover

It is essential that the cover you purchase fits the console installed on your Salpa Soleil 20 so that it is properly adjusted and thus minimizes wind resistance as much as possible.
This highly protective cover will save you time cleaning the console. Additionally, the electronics will be protected from UV rays and rain and will also be less visible.

We use the best materials to guarantee you a durable and resistant product.

All successfully fulfill the function of protecting your boat.

The choice depends on the material and therefore its price.
- Tarp made of polyester that is very UV resistant, coated on both sides, lightweight at 325 g/m² (half the weight of truck tarp), light gray color, it folds easily.
- Material with a woven appearance which is a polyester very resistant to UV coated on the inner side making it waterproof, it is lightweight at 300 g/m² and folds easily. Dark gray or black color.
- Genuine fabric which is a weave of acrylic threads dyed throughout so that the color lasts over time, lightweight at 320 g/m² but less flexible to fold when new. This fabric has the advantage of being waterproof and breathable, which prevents condensation. Colors: black, very light gray (Silver), medium gray (cadet grey), dune (dark beige).

The assembly is always done with UV-treated sail thread, and polyester webbing also resistant to UV.

Reinforcements are added where there is a risk of rubbing.

To properly tighten the cover and prevent it from flapping in the wind, adjustable straps pass through a screwed plastic eyelet.

Fixings for the boat are provided, including stainless steel screws.

For each plastic loop provided, we include 2 stainless steel sheet metal screws with a shaft diameter of 3.5mm and a length of 16mm. Drilling should be done with a bit of diameter 2.7mm.

This cover protects both the console and the bolster (pilot seat) at the same time.