Flat deck cover Structures Pogo 30

Configuration of the flat deck cover on the boat

The boat remains rigged in most of our flat deck covers, but upon request, we can make the cover for an unrigged boat, which usually applies to boats under 25 feet.

This mooring cover is fitted closely to the deck, following its irregularities. For example, it will rest on a winch, so we add reinforcement at the contact point.
This cover stops before the base of the stanchions, with the necessary clearance to tension the fabric. It is equipped with a mast collar, meaning the mast base is enclosed in a sleeve strapped at the top and is generally made in two parts connected by a sturdy YKK nylon zipper, including the slider!
This cover protects the entire deck of your boat from weather, external dirt, and UV-related damage. Save time on maintenance to enjoy more time sailing. Extend the longevity and value of your boat.

Customized to your boat’s specific features (photos required). By features, we mean equipment such as: bimini, arch, davit, navigation lights, antenna, and any added deck fittings.

A selection of marine-grade materials

All rubbing areas are reinforced.

We use a polyester tarp coated with PVC on both sides in gray color, which is durable, lightweight, low-stretch, mold-resistant, and abrasion-resistant—exactly what you need to protect your sailboat.

Although less airtight than a winter cover, the flat deck cover is also equipped with a vent to prevent condensation under the PVC tarp.
We use very strong sail thread resistant to breakage and UV to secure our seams.

A fit that guarantees the cover’s durability

A large number of fastenings are provided, and we recommend using them all to properly adjust the protective cover. It only takes a strong gust of wind to tear a poorly fitted cover. Proper tension of straps and ropes is crucial. In case of a storm with the boat exposed to prevailing winds, we recommend temporarily removing your cover.