Flat deck cover Jeanneau Cap Camarat 7.5 CC S3

The mooring cover is particularly useful for protecting the boat's upholstery and polyester hull. The upholstery, which includes cushions, seats, and other fabric accessories, is especially vulnerable to natural elements that can cause fading and rapid deterioration. Using a custom cover protects the upholstery from UV rays, rain, wind, and other natural elements that can damage them.

When you invest in a Cap Camarat 7.5 CC S3 boat, it is essential to ensure its protection against natural elements.

This protective cover covers your boat from bow to stern except for the railings. It is perfectly fitted, which is a mark of quality in design and will allow it to protect your boat from weather and sun for a long time.

Save time on maintenance to enjoy more time sailing. Extend the longevity and value of your Jeanneau Cap Camarat 7.5 CC S3.

Our boat cover is made to your specifications either:

• in marine-grade polyester tarpaulin coated on both sides, weighing 325g/m² and in gray color.
• or in polyester fabric which has the appearance of textile

To ensure its hold, all naturally existing attachment points on the boat are utilized to avoid drilling.

The marine fabric is secured at the cleats and the base of the railings either by:
- straps that wrap around the stainless steel railings and/or cleats and are threaded through a ladder lock buckle and then tightened firmly. (the ladder lock is the flat buckle you find on backpacks, for example)
- bungee cords that wrap around the stainless steel railings and/or cleats passing through eyelets.

The outboard motor is not covered; we invite you to check the covers we offer for motors.

Each cover is custom-made because we take into account your boat’s nautical equipment (photos required). By nautical equipment, we mean: bimini, arches, roll bar, tow mast, navigation lights, antenna, etc. Please specify any particular features when ordering.

This protective cover is to be used on land or at anchor. It should not remain on the boat during transport, for two reasons: first, for safety, the cover should not come loose; second, friction caused by speed could damage the boat’s surface, causing premature wear.

It is important to note that the cover is not designed to withstand strong winds such as storms, cyclones, or hurricanes. It must be removed before bad weather.

The effect of strong wind is amplified when the boat is on a cradle, meaning elevated, and even more so if it is not facing the prevailing wind.

Be sure to watch the video to see how to install it, and you will see that this installation requires no drilling.