Flat deck cover for Jeanneau Cap Camarat 7.5 WA S3

A mooring cover is particularly useful for protecting the upholstery and the boat’s polyester hull. The upholstery, which includes cushions, seats and other fabric accessories, is particularly vulnerable to the elements, which can quickly cause it to fade and deteriorate. Using a custom-made cover protects the upholstery from UV rays, rain, wind and other elements that can damage it.

When you invest in a Cap Camarat 7.5 WA S3, it is essential to protect it from the elements.

This protective cover covers your boat from bow to stern, except for the guardrails. It is a perfect fit, reflecting the quality of its design and helping to protect your boat from bad weather and the sun for a long time.

Spend less time on maintenance and more time out on the water. Extend the lifespan and preserve the value of your Jeanneau Cap Camarat 7.5 WA S3.

Our boat cover is made to suit your preference, either:

• from marine-grade polyester tarpaulin, coated on both sides and weighing 325 g/m².
• or from polyester fabric with the look of woven fabric

To ensure a secure fit, all existing attachment points on the boat are used, avoiding the need to drill holes.

The marine fabric is secured at the cleats and the feet of the guardrails using either:
- Straps that wrap around the stainless-steel guardrails and/or cleats, then thread through a ladder-lock buckle and are tightened firmly by pulling. (A ladder-lock buckle is the flat buckle found on backpacks, for example.)
- Shock cords that wrap around the stainless-steel guardrails and/or cleats and pass through eyelets.

The outboard motor is not covered. Please see the covers we offer for protecting motors.

Each cover is made to measure, taking into account the marine equipment on your boat (photos required). Marine equipment includes a bimini, arches, roll bar, ski tow pylon, navigation light, antenna, etc. Please specify any special features when placing your order.

This protective cover is for use ashore or at anchor. It must not be left on the boat during transport for two reasons: first, for safety, as the cover could come loose; and second, because friction caused by speed could damage the boat’s surface and lead to premature wear.

Please note that the cover is not designed to withstand strong winds such as those caused by storms, cyclones or hurricanes. It should be removed before severe weather.

Strong winds have a greater impact when the boat is ashore on a raised cradle, especially if it is not facing into the prevailing wind.