Flat Deck Cover for Quicksilver Activ 675 Bowrider

A mooring cover is particularly useful for protecting the boat’s upholstery and polyester hull. The upholstery, including cushions, seats and other fabric accessories, is especially vulnerable to the elements, which can quickly cause fading and deterioration. A custom-made cover protects the upholstery from UV rays, rain, wind and other natural elements that can damage it.

When you invest in an Activ 675 Bowrider, it is essential to protect it from the elements.

This full boat cover, from bow to stern, excluding the guardrails, protects your boat from the weather, outdoor dirt and UV damage.

Spend less time on maintenance and more time out on the water. Extend the lifespan and preserve the value of your Quicksilver Activ 675 Bowrider.

Our boat cover is made to suit your preference, either:

• in marine-grade polyester tarpaulin, coated on both sides and weighing 325 g/m².
• or in polyester fabric with a textile-like appearance

We use the existing attachment points on the boat to secure the mooring cover. This means no drilling is required.

The marine fabric is secured around the cleats and the bases of the guardrails using either:
- Straps that wrap around the stainless-steel guardrails and/or cleats, then thread through a ladder-lock buckle and are tightened by pulling firmly. (A ladder-lock is the flat buckle commonly found on backpacks, for example.)
- Shock cords that wrap around the stainless-steel guardrails and/or cleats and pass through eyelets.

The outboard motor is not covered. Please see the covers we offer for protecting motors.

Each cover is made to measure to accommodate your boat’s equipment (photos required). This includes equipment such as a bimini, frames, roll bar, tow pylon, navigation light, antenna, etc. Please specify any requirements when placing your order.

This protective cover is for use on land or at a mooring. It must be removed before transporting the boat for two reasons: first, for safety, to prevent the cover from coming loose; and second, because friction at speed could damage the boat’s surface and cause premature wear.

Please note that the cover is not designed to withstand strong winds such as those caused by storms, cyclones or hurricanes. It must be removed before these weather events arrive.

Strong winds have a greater effect when the boat is on land on a cradle, that is, raised off the ground, and even more so if it is not facing the prevailing wind.