Flat deck cover Jeanneau Cap Camarat 6.5 CC S3

Using a mooring cover is one of the most effective ways to protect your boat from sun rays, rain, and other elements that can damage the hull and upholstery. Polyester is a commonly used material in boat construction. Although it is UV resistant, it can degrade over time due to exposure to the elements. UV rays can cause fading and deterioration of the polyester surface. Using a mooring cover protects the polyester surface from UV rays, thereby extending the lifespan of your boat.

When you invest in a Cap Camarat 6.5 CC S3 boat, it is essential to ensure its protection against natural elements.

This protective cover covers your boat from bow to stern except for the railings. It is perfectly fitted, which is a mark of quality in design and will allow it to protect your boat from weather and sun for a long time.

Save time on maintenance to benefit from more time on the water. Extend the longevity and value of your Jeanneau Cap Camarat 6.5 CC S3.

Our boat cover is made to your preference either:

• in nautical quality polyester tarpaulin coated on both sides, weighing 325g/m² and in gray color.
• or in polyester fabric which has the appearance of textile

We prioritize using the natural attachment points on the boat to secure the mooring cover. Thus, no drilling is required.

The marine fabric is secured at the cleats and the feet of the railings either by:
- Straps that wrap around the stainless steel railings and/or cleats and are threaded through a ladder lock buckle, then you tighten the strap firmly. (The ladder lock is the flat buckle you find on backpacks, for example)
- Bungee cords that wrap around the stainless steel railings and/or cleats passing through eyelets.

The outboard motor is not covered; we invite you to check the covers we offer for motors.

Each cover is custom-made, as we take into account the nautical equipment of your boat (photos required). By nautical equipment, we mean: bimini, arches, roll bar, tow mast, navigation lights, antenna, etc. Please specify any particular features when ordering.

This protective tarpaulin is to be used on land or at mooring. It should not remain on the boat during transport, for two reasons: first, for safety reasons, the cover should not come loose, and second, the friction caused by speed could damage the boat’s surface, causing premature wear.

It is important to note that the protection is not designed to withstand strong winds such as storms, cyclones, or hurricanes. It must be removed before the arrival of such weather phenomena.

The effect of strong winds is amplified when the boat is on land on a cradle, meaning elevated, and even more so if it is not facing the prevailing wind.