Flat roof Quicksilver Activ 675 Cruiser deck

Using a mooring cover is one of the most effective ways to protect your boat from the sun's rays, rain, and other elements that can damage the hull and upholstery. Polyester is a commonly used material for boat construction. Although it is UV resistant, it can degrade over time due to exposure to the elements. UV rays can cause fading and deterioration of the polyester surface. Using a mooring cover protects the polyester surface from UV rays, thereby extending the life of your boat.

When you invest in an Activ 675 Cruiser boat, it is essential to ensure its protection against natural elements.

This full coverage of the boat, from bow to stern except for the balconies, protects your boat from bad weather, external dirt, and UV-related damage.

Save time on maintenance to benefit from more time sailing. Extend the longevity and value of your Quicksilver Activ 675 Cruiser.

Our boat cover is made to your specifications either:

• in marine-grade polyester tarpaulin coated on both sides, weighing 325g/m² and in gray color.
• or in polyester fabric which has the appearance of cloth

To ensure it stays in place, all naturally existing attachment points on the boat are utilized to avoid drilling.

The marine fabric is secured at the cleats and balcony feet either by:
- straps that wrap around the stainless steel balconies and/or cleats and are threaded through a ladder lock buckle and then tightened firmly. (the ladder lock is the flat buckle you find on backpacks, for example)
- bungee cords that wrap around the stainless steel balconies and/or cleats passing through eyelets.

The outboard motor is not covered; we invite you to check the covers we offer for motors.

Each cover is custom-made because we take into account your boat’s nautical equipment (photos required). Nautical equipment includes: bimini, arches, roll bar, tow mast, navigation lights, antenna, etc. Please specify any particular features when ordering.

This protective tarpaulin is to be used on land or at anchor. It should not remain on the boat during transport, for two reasons: first, for safety, the cover should not come loose; and second, friction caused by speed could damage the boat’s surface, causing premature wear.

It is important to note that the cover is not designed to withstand strong winds such as storms, cyclones, or hurricanes. It must be removed before the arrival of such weather phenomena.

The effect of strong winds is amplified when the boat is on a cradle on land, meaning elevated, and even more so if it is not facing the prevailing wind.

The cover is designed for a boat without a bimini.
If you have a bimini, please call us.