Flat cover deck Quicksilver Activ 675 Cruiser

The mooring cover is particularly useful for protecting the upholstery and the polyester hull of the boat. The upholstery, which includes cushions, seats, and other fabric accessories, is especially vulnerable to natural elements that can cause fading and rapid deterioration. Using a custom cover protects the upholstery from UV rays, rain, wind, and other natural elements that can damage them.

When you invest in an Activ 675 Cruiser boat, it is essential to ensure its protection against natural elements.

This complete boat cover, from bow to stern except for the railings, protects your boat from bad weather, external dirt, and UV-related damage.

Save time on maintenance to enjoy more time sailing. Extend the longevity and value of your Quicksilver Activ 675 Cruiser.

Our boat cover is made to your specifications, either:

• in marine-quality polyester tarp coated on both sides, weighing 325g/m² and in gray color.
• or in polyester fabric that has the appearance of textile

We prioritize using the natural attachment points on the boat to secure the mooring cover. Thus, no drilling is required.

The marine fabric is secured at the cleats and the feet of the railings either by:
- Straps that wrap around the stainless steel railings and/or cleats and are threaded through a ladder lock buckle, then tightened firmly. (The ladder lock is the flat buckle you find on backpacks, for example)
- Bungee cords that wrap around the stainless steel railings and/or cleats passing through eyelets.

The outboard motor is not covered; we invite you to check the covers we offer for motors.

Each cover is custom-made, as we take into account the nautical equipment on your boat (photos required). By nautical equipment, we mean: bimini, arches, roll bar, tow mast, navigation lights, antenna, etc. Please specify any particular features when ordering.

This protective tarp is to be used on land or at mooring. It should not remain on the boat during transport for two reasons: first, for safety, the cover should not come loose, and second, friction caused by speed could damage the boat’s surface, causing premature wear.

It is important to note that the cover is not designed to withstand strong winds such as storms, cyclones, or hurricanes. It must be removed before severe weather.

The effect of strong wind is amplified when the boat is on a cradle on land, meaning elevated, and even more so if it is not facing the prevailing wind.

The cover is designed for a boat without a bimini.
If you have a bimini, please call us.