Flat deck cover for Jeanneau Cap Camarat 755 WA

A mooring cover is particularly useful for protecting the upholstery and the boat’s polyester hull. Upholstery, including cushions, seats and other fabric accessories, is especially vulnerable to the elements, which can quickly cause it to fade and deteriorate. A custom-made cover protects the upholstery from UV rays, rain, wind and other elements that can damage it.

When you invest in a Cap Camarat 755 WA boat, it is essential to protect it from the elements.

This protective cover covers your boat from bow to stern, except for the guardrails. It fits perfectly, a mark of quality in its design, and will protect your boat from the elements and the sun for a long time.

Spend less time on maintenance and more time out on the water. Extend the life and preserve the value of your Jeanneau Cap Camarat 755 WA.

Our boat cover is made to suit your preference, either:

• from marine-grade polyester tarpaulin coated on both sides, weighing 325 g/m².
• or from polyester fabric with the look of woven fabric.

We use the boat’s existing attachment points wherever possible to secure the mooring cover. This means no drilling is required.

The marine fabric is secured around the cleats and guardrail stanchions using either:
- Straps that wrap around the stainless-steel guardrails and/or cleats, then thread back through a ladder-lock buckle and are tightened by pulling firmly. (A ladder-lock buckle is the flat buckle commonly found on backpacks, for example.)
- Shock cords that wrap around the stainless-steel guardrails and/or cleats and pass through eyelets.

The outboard motor is not covered. Please see the motor covers we offer.

Each cover is custom-made to accommodate your boat’s equipment (photos required). This includes equipment such as a bimini, support frames, roll bar, tow pole, navigation light, antenna, etc. Please provide details of any specific features when placing your order.

This protective cover is intended for use on land or at anchor. It must not be left on the boat during transport for two reasons: first, for safety, to prevent the cover from coming loose; and second, because friction caused by the boat’s speed could damage the surface and cause premature wear.

Please note that the cover is not designed to withstand strong winds such as those caused by storms, cyclones or hurricanes. It must be removed before these weather events arrive.

Strong winds have an even greater impact when the boat is elevated on a cradle on land, especially if it is not facing into the prevailing wind.