Winter cover for Zodiac Medline 6.8

The winter cover for the Medline 6.8 rigid inflatable boat is an essential piece of equipment to protect your boat from bad weather, UV rays, and dirt during the winter months or when it is not used for an extended period.

Since it is easy to handle, you can also put it back on between launches during the season.

The boat cover made by SNA is made from a high-quality marine material, consisting of polyester coated with PVC on both sides and lightweight, 325g/m², which is half the weight of a truck tarp. The color is gray.

The cover protects the entire boat, from the front (the bow roller, which remains accessible in 95% of our covers) to the transom, excluding the engine so it can be fully lifted. You will find covers for your outboard motor on our website.
The tarp is attached to the float's fender (also called the anti-chafing strip, which absorbs shocks rather than having the float in direct contact) by hooks held together with a bungee cord. For balanced fastening, the bungee (thick elastic) passes through eyelets distributed around the tarp's perimeter. To prevent the stainless steel eyelets from touching the float, we sew a PVC fabric flap underneath the eyelets. The plastic hooks attach to the gutter located under the fender. For full fastening details, please refer to our video installation tutorial.

You will notice that installing the boat cover requires no drilling.
We use all the existing natural attachment points on your inflatable boat.

Every boat is unique, and our tarps recognize that. Our commitment to customization means you will find the perfect size and shape for your vessel.

We check the console’s position when bolted, the presence of a bimini, roll-bar, railings…

For example, the console’s position when it is not molded must be confirmed with a measurement form that we send you after your order or that you can fill out immediately by downloading it.
The bimini and roll-bar options must be indicated by selecting the option when adding the product to your cart. There is also a measurement form to fill out so we can plan the necessary openings for the roll-bar feet.

We anticipate everything as much as possible so that you are fully satisfied with your purchase.

The boat cover is equipped with a vent to ensure ventilation under the cover.

All seams are made with UV-resistant sail thread, ensuring great durability for the covers.

The cover is delivered to you in a bag.

The boat cover will help you reduce long-term maintenance and repair costs while allowing you to spend more time enjoying your leisure activities.

Please note that this full cover must be removed before driving on the road.

During the boating season, it is also useful to have console and seat covers that you put on each evening instead of using the mooring cover.

Finally, you can be reassured by the exceptional quality of our boat cover, also commonly called a mooring cover, even though it is more difficult to install when the boat is in the water. Manufactured by our company SNA in Morbihan, which is a trusted company with 13 years of experience dedicated to customer satisfaction.

The coverage of the float ends is part of the continuous improvements we make based on customer feedback.

This was designed to maximize UV protection and facilitate installation at mooring; fitting the rear allows the cover to be stretched and rolled forward.

The tarp can come into contact with water.

Although we do not recommend installation at mooring, it is possible.