Winter Cover for Zodiac Medline 7.5

Imagine a cover that goes beyond simple protection against the elements. Our marine covers are premium shields for your nautical investment.

Made from highly durable materials, they are specifically designed to withstand the harsh conditions of the marine environment. Whether it's the UV rays of the sun or the moon, salty humidity, unexpected showers, bird droppings, or fallen leaves, our boat covers are made to protect your vessel against all the challenges the sea may present.

The boat cover made by SNA is crafted from a nautical-grade material, made of polyester coated with PVC on both sides and lightweight, 325g/m², which is half the weight of a truck tarp. The color is gray.

The cover protects the entire boat, from the bow (the bow roller, which remains accessible in 95% of our covers) to the transom, excluding the engine to allow for full removal. You will find covers to protect your outboard motor on our website.
The cover is attached to the float's fender (also called anti-chafing tape, it absorbs shocks rather than having the fender in direct contact) with hooks held together by a bungee cord. For balanced fastening, the bungee cord (thick elastic) passes through eyelets distributed around the entire perimeter of the cover. To prevent the stainless steel eyelets from touching the fender, we sew a PVC fabric flap underneath the eyelets. The plastic hooks attach to the gutter located on the underside of the fender.To learn all the fastening details, refer to our installation tutorial video.

You will be able to observe the installation of the boat coverdoes not require any drilling. .
We use all the existing attachment points naturally found on your inflatable boat.

The cover made for you following your order is a custom-made cover, that is to say thatIt takes into account the specific features of your Medline 7.5 boat.

We check the position of the console when bolted, the presence of a bimini, a roll-bar, railings…

For example, the location of the console when it is not molded must be confirmed with a dimension sheet that we will send you after your order or that you can fill out immediately by downloading it.
The bimini and roll-bar options should be indicated by selecting the option at the time of adding the product to your cart. There is also a measurement form to fill out so that we can plan the necessary openings for the roll-bar feet to pass through.

We anticipate everything to the fullest so that you are completely satisfied with your purchase.

The boat cover is equipped with a vent to ensure the ventilation under the cover.

All seams are made with a UV-resistant sailcloth fabric which ensures a very long lifespan for the covers.

The cover is provided to you delivered in a bag.

The boat cover will allow you to reduce long-term maintenance and repair costs while dedicating more time to leisure activities.

Please note that this full cover must be removed before driving on the road.

During the sailing season, it is also useful to have the console and seat covers that you put on every evening instead of putting on the mooring cover.

Finally, you can be reassured by the exceptional quality of our boat cover, also commonly known as an anchoring cover even if it is more difficult to install when the boat is in the water. Manufactured by our company SNA in Morbihan, which is your trusted partner in marine protection for 13 years

The covering of the float ends is part of the continuous improvements we make based on feedback from our customers.

This one has been designed to maximize UV protection and to facilitate installation at anchor; the rear fitting allows the cover to be stretched and rolled forward.

The cover can come into contact with water.

Even though we do not recommend installation while at anchor, it is possible.