3D Winter Cover Tender Ultimate Rib 390

The winter cover for the Ultimate Rib 390 rigid inflatable boat is an essential piece of equipment to protect your boat from bad weather, UV rays, and dirt during the winter months or when it is not in use for an extended period.

Since it is easy to handle, you can also put it back on between launches during the season.

The boat cover made by SNA is crafted from a marine-grade material, consisting of polyester coated with PVC on both sides and lightweight, 325g/m², which is half the weight of a truck tarp. The color is gray.

The cover protects the entire boat, from the bow (the bow roller remains accessible in 95% of our covers) to the transom, excluding the engine so it can be fully tilted up. You will find covers for your outboard motor on our website.
The tarp is attached to the float’s fender (also called the anti-chafe strip, which absorbs shocks so the float itself is not in direct contact) by hooks held together with a bungee cord. For balanced fastening, the bungee (thick elastic) passes through eyelets distributed around the entire perimeter of the tarp. To prevent the stainless steel eyelets from touching the float, we sew a PVC flap underneath the eyelets. The plastic hooks attach to the gutter located under the fender. For all fastening details, please refer to our video installation tutorial.

You will notice that installing the boat cover requires no drilling.
We use all the existing attachment points naturally present on your inflatable boat.

Every boat is unique, and our tarps reflect that. Our commitment to customization means you will find the perfect size and shape for your vessel.

We check the position of the console when it is bolted, the presence of a bimini, roll-bar, railings…

For example, the position of the console when it is not molded must be confirmed with a measurement form that we send you after your order or that you can fill out immediately by downloading it.
Bimini and roll-bar options should be indicated by selecting the option when adding the product to your cart. There is also a measurement form to fill out so we can plan the necessary openings for the roll-bar feet.

We anticipate everything as much as possible to ensure you are completely satisfied with your purchase.

The boat cover is equipped with a vent to ensure ventilation under the cover.

All seams are sewn with UV-resistant sail thread, which guarantees a very long lifespan for the covers.

The cover is delivered to you in a bag.

The cover for rigid inflatable boats is a wise investment for any boat owner who wants to extend the life of their boat and reduce maintenance and repair costs in the long term.

Please note that this full cover must be removed before driving on the road.

During the boating season, it is also useful to have console and seat covers that you put on each evening instead of using the mooring cover.

Finally, you can be reassured by the exceptional quality of our boat cover, also commonly called a mooring cover, even though it is more difficult to install when the boat is in the water. Made by our company SNA in Brittany, which has been your trusted partner in marine protection for 13 years.