Flat deck cover Jeanneau Cap Camarat 755 WA

The mooring cover is particularly useful for protecting the boat's upholstery and polyester hull. The upholstery, which includes cushions, seats, and other fabric accessories, is especially vulnerable to natural elements that can cause fading and rapid deterioration. Using a custom cover protects the upholstery from UV rays, rain, wind, and other natural elements that can damage it.

When you invest in a Cap Camarat 755 WA boat, it is essential to ensure its protection against natural elements.

This protective cover covers your boat from bow to stern except for the railings. It is perfectly fitted, which is a mark of quality in design and will allow it to protect your boat from weather and sun for a long time.

Save time on maintenance to enjoy more time sailing. Extend the longevity and value of your Jeanneau Cap Camarat 755 WA.

Our boat cover is made to your specifications either:

• in marine-grade polyester tarp coated on both sides, weighing 325g/m² and in gray color.
• or in polyester fabric that has the appearance of textile

We prioritize using the natural attachment points on the boat to secure the mooring cover. Thus, no drilling is required.

The marine fabric is secured at the cleats and the feet of the railings either by:
- Straps that wrap around the stainless steel railings and/or cleats and are threaded through a ladder lock buckle, then tightened firmly. (The ladder lock is the flat buckle you find on backpacks, for example)
- Bungee cords that wrap around the stainless steel railings and/or cleats passing through eyelets.

The outboard motor is not covered; we invite you to check the covers we offer for motors.

Each cover is custom-made, as we take into account your boat's nautical equipment (photos required). By nautical equipment, we mean: bimini, arches, roll bar, tow mast, navigation lights, antenna, etc. Please specify any particular features when ordering.

This protective tarp is to be used on land or at mooring. It should not remain on the boat during transport for two reasons: first, for safety, the cover should not come loose, and second, friction caused by speed could damage the boat's surface, causing premature wear.

It is important to note that the cover is not designed to withstand strong winds such as storms, cyclones, or hurricanes. It must be removed before the arrival of such weather phenomena.

The effect of strong winds is amplified when the boat is on a cradle on land, meaning elevated, and even more so if it is not facing the prevailing wind.